WARNING: California Proposition 65

Fabrication: Mineral Shock Fork Oil

RAVENOL Fork Oil Very Heavy 20W is a fork oil on mineral oil base which was developed for all forks of offroad motorbikes and motor cross bikes.

RAVENOL Fork Oil Very Heavy 20W is especially characterized by a high and stable viscosity index as well as a solid corrosion protection. Efficient additives offer even under extreme loads an excellent corrosion protection. The behaviour against sealing materials is neutral.

Application Directions:

RAVENOL Fork Oil Very Heavy 20W was developed for the use in all chassis components of two-wheeler vehicles and offers good power characteristics. In order to obtain the optimum viscosity for the vehicle and operating condition the mineral fork oils are miscible among each other.

Extensively engineered for Showa, KYB, Marzocchi, WP, Ohlins, and FOX suspensions as used in accordance with Yamaha, Kawasaki, Honda, Aprilia, BMW, Suzuki, Ducati, Triumph, Moto-Guzz, KTM, and Husqvarna motorcycles.

Quality Classification:

RAVENOL Fork Oil Very Heavy 20W is tried and tested for aggregates specifying:
Recommendations: Yamaha, Kawasaki, Honda, Aprilia, BMW, Suzuki, Ducati, Triumph, Moto-Guzzi

Technical Characteristics:

RAVENOL Fork Oil Very Heavy 20W offers:

• Good damping characteristics at all temperatures
• High and stable viscosity index
• Excellent protection against corrosion, therefore a longer endurance of the fork components
• Extreme protection against corrosion of the inside components
• Very good air and water separation behaviour to prevent foam formation
• Neutral behaviour against sealings made of plastics
• Very low pour point