10W-40 Diesel Truck Oil - RAVENOL SDT Super Duty Truck

$15.95 - $54.95
( 0 Reviews )

Current stock:

warning.png WARNINGCalifornia Proposition 65

Fabrication: Synthetic & Truck

RAVENOL SDT Super Duty Truck SAE 10W-40 is a synthetic fuel-saving “Low SAPS” truck engine oil formulated using the latest additive technology with very particular base oils. It has been specially developed for diesel engines subjected to the toughest conditions in all seasons. It is extremely well suited to use in EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines in combination with diesel fuel with up to 500 ppm sulphur content.

RAVENOL SDT Super Duty Truck SAE 10W-40 can be used in modern trucks and “Tier 4” off-road vehicles and was designed as a SHPD engine oil (Super High Performance Diesel) for use in engines with and without a particle filter and catalytic converter and with specific requirements for Low SAPS technology. The product offers low sulphur, phosphorous and ash content.

RAVENOL SDT Super Duty Truck SAE 10W-40 has particularly high oxidation and shear stability as well as improved air-release properties, allowing it to fulfil and exceed the latest requirements in accordance with API CK-4.

RAVENOL SDT Super Duty Truck SAE 10W-40 offers reliable cold start performance at low outdoor temperatures and full lubricity at high operating temperatures. This reduces friction loss and wear and tear.

RAVENOL SDT Super Duty Truck SAE 10W-40 was licensed as the first European engine oil by the API with the specifications API CK-4 and API CJ-4.

The new API CK-4 specification is suitable for both current and older vehicles. It is backward compatible and can also be used for diesel fuels which contain up to 500 ppm of sulphur.

Application Directions:

RAVENOL SDT Super Duty Truck SAE 10W-40 is a high-performance engine oil which can be used all year round and which has been designed to meet the new exhaust gas emissions guidelines. It has been created for vehicles with exhaust gas recirculation systems. Extended oil change intervals in accordance with manufacturer instructions. RAVENOL SDT Super Duty Truck SAE 10W-40 is particularly suitable for use in a mixed fleet including EURO 2, EURO 3, EURO 4, EURO 5 and EURO 6 engines and therefore offers the ideal solution to reducing the range of products needed. Please follow the manufacturer's recommendations!

Quality Classification:

RAVENOL SDT Super Duty Truck SAE 10W-40 is tried and tested is for aggregates specifying:
Specifications: API CK-4, API CJ-4, API CI-4, ACEA E6, E7, E9
License: API CK-4, API CJ-4
Approvals: MB-Approval 228.51, Volvo VDS-4.5, Renault VI RLD-4, Mack EOS-4.5
Recommendations: MTU Typ 3.1, Cummins CES 20081, Deutz DQC IV-10 LA, Detroit Diesel 93K218, Caterpillar ECF-3

Technical Characteristics:

RAVENOL SDT Super Duty Truck SAE 10W-40 offers:

  • Very stable and excellent viscosity behavior and high shear stability
  • Fuel saving under all operating conditions
  • Maintains the efficiency of the exhaust gas purification systems over a very long term
  • Power losses caused by diesel particulate filters are prevented and a higher efficiency is achieved
  • Low evaporation tendency resulting in low oil consumption
  • Extended oil change intervals protect natural resources
  • An excellent cold start behavior
  • Low SAPS = Low Sulphated ash, Phosphorous and Sulfur
  • Can also be used in many commercial vehicles without diesel particulate filters

RAVENOL AMERICA LLC is not affiliated with any vehicle manufacture noted in this listing. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.

2.40 LBS

0 Reviews

Be the first to review this product.

Add a Review