5W-30 Diesel Truck Oil - RAVENOL FET Fuel Efficiency Truck

$16.95 - $64.95
( 0 Reviews )

Current stock:

warning.png WARNINGCalifornia Proposition 65

Fabrication: Synthetic Truck

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is a synthetic Fuel Economy Longlife multigrade engine oil with an HTHS viscosity of between 2.9 cP and 3.2 cP which has been specially developed for the latest generation of turbodiesel commercial vehicle engines.

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API specification FA-4 fulfils the requirements of the On-Highway Greenhouse Gas (GHG) standards for the reduction of greenhouse gas emissions from model year 2017 onwards.

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is suitable for diesel fuel with a sulphur content of up to 15ppm and can be used in the latest exhaust gas- optimized engines with exhaust gas treatment such as DPF diesel particulate filters and other systems.

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 contains shear-stable ingredients and improves engine performance, reliability and cleanliness. It delivers significant improvements to oxidation resistance, air supply, shear stability, wear and tear, deposits and a reduction in fuel consumption.

Application Directions:

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is used by engine manufacturers as a year-round multigrade engine oil for engines with exhaust treatment systems with viscosity grade SAE 5W-30 in diesel commercial vehicle engines which are subject to heavy strain. RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with category FA-4 is neither interchangeable nor backward-compatible with API CK-4, CJ-4, CI-4 with CI-4 PLUS, CI-4 or CH-4 oils.

Note the manufacturers recommendations in order to establish if RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API FA-4 is suitable for use. RAVENOL FET Fuel Efficiency Truck SAE 5W-30 with API FA-4 is not recommended for use with fuels with more than 15 ppm of sulphur.

Quality Classification:

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 is tried and tested for aggregates specifying:
Specification: API SN/FA-4
Approval: MB-Approval 228.61
Recommendations: Cummins CES 20087; DDC 93K223

Technical Characteristics:

RAVENOL FET Fuel Efficiency Truck SAE 5W-30 offers:

  • Very stable, extremely high-level viscosity performance and high shear stability
  • Fuel savings under all operating conditions
  • Maintains the effectiveness of the waste gas purification systems over a very long operating period
  • Loss of performance due to blocked diesel particulate filters is inhibited and a higher degree of effectiveness is achieved
  • Low volatility, resulting in lower oil consumption
  • Extended oil change intervals protect natural resources
  • Very good cold start performance
  • Low SAPS = low sulphate ash, phosphorus and sulphur
  • Can be used in many commercial vehicles including those not fitted with a diesel particulate filter

RAVENOL AMERICA LLC is not affiliated with any vehicle manufacture noted in this listing. All trademarks and OE specification part numbers referenced in this product listing are displayed for identification purposes only and are in no way intended to denote any affiliation with their corresponding owners.

SKU:
1121105
Weight:
2.95 LBS
Height:
10.00
Width:
3.00
Depth:
4.00

0 Reviews

Be the first to review this product.

Add a Review